[CharlesYin]

Hi, all

I think some of you have met the "language doesn't match" problem when flashing the firmware. The following may be a way to solve the problem:

The attachment is a tool which can split the .nb0 file from .bin or temp.dat file. The .nb0(the '0' is a number, not a letter) file is only OS part of firmware.

Flash steps:

1. Run the tool in console, give a parameter of the .bin file path. The tool will generate all the files packed in the bin file.
For example: put the x960datsplit.exe in "D:\" and acer.bin in "D:\" too.
Run the application in console: "D:\x960datsplit.exe acer.bin"
You will get the splitted files in "D:\". One of them is OS.nb0. This is the file we want to flash with.

2. Prepare a microSD card less than 2G, formatted in FAT.
3. Copy the OS.nb0 to the card.
4. Rename OS.nb0 to flash.nb0.
5. Put the microSD card in F900.
6. Make sure your phone is powered off.
7. Press OK button(the button between volume + and volume -) and power button. It will flash automaticly.
8. When you see: "SD download complete", you can reset your phone. Flash complete.
9. You may found out that the first screen picture(default is "Acer") is gone, that's normal because the picture is in the EXTROM which we haven't flashed.
10. After the first clean boot is finished and aligned screen etc, the phone will show setup EXTROM's cab interface. Because we dont have EXTROM, we have to skip this step. Press camera button when the screen shows until it says:" you can release camera button now", the step is skipped.
11. You can install cabs in EXTROM folder by yourself.

NOTE: Please select the correct bin file, or you may BRICK your phone.

Enjoy!

PS: Excuse me for my poor English.

Attached File(s)

•  x960datsplit.zip (29.17K)
  Number of downloads: 895

[varavut]

Thank you for expand method.
sorry for my bad english.

[Wingbow]

So how to flash the startup.jpg into the extROM of the device.

[teffect]

how can I flash my "English" F900 to "traditional Chinese ROM" ???
I have got the official Traditional Chinese ROM from ACER ........

*1st step is extract the "temp.dat" from "Traditional Chinese ROM" ??
*2nd step is extract "OS.Nb0" from this "chinese ROM" ??
*3rd step is flash "OS.Nb0 " to F900 ??

my F900 is English 2.001 Rom already...... just need to flash "chinese OS.NB0" only ??

I am confusing of it...........

thanks for advices ~~~

[CharlesYin]

teffect, on Nov 28 2009, 01:21 AM, said:

how can I flash my "English" F900 to "traditional Chinese ROM" ???
I have got the official Traditional Chinese ROM from ACER ........

*1st step is extract the "temp.dat" from "Traditional Chinese ROM" ??
*2nd step is extract "OS.Nb0" from this "chinese ROM" ??
*3rd step is flash "OS.Nb0 " to F900 ??

my F900 is English 2.001 Rom already...... just need to flash "chinese OS.NB0" only ??

I am confusing of it...........

thanks for advices ~~~

Yes, that is the correct way. It will only flash the OS part of the ROM so you won't meet the language problem.

[dust2k]

it's a good way, but it can only flash OS part, so if any other parts we need, what can we do? is it possible to flash any part of ROM? any such kind of utilities or manual/instructions available?

[elektronat]

Soryy Not download files plss help me

Thank you.....

[shoah]

elektronat, on 02 December 2009 - 09:27 PM, said:

Soryy Not download files plss help me

Thank you.....

elektronat I think your account is not verificated in eten-useres. My problem was the same.

[sanen]

Is it possible to flash OS part plus EXT_ROM file? (It is two different part).

Thank you.

[CharlesYin]

sanen, on 03 December 2009 - 07:57 PM, said:

Is it possible to flash OS part plus EXT_ROM file? (It is two different part).

Thank you.

Sorry, I dont know how to do this. But you can install the cabs after you flashed the OS part.

[shoah]

CharlesYin, on 03 December 2009 - 01:19 PM, said:

Sorry, I dont know how to do this. But you can install the cabs after you flashed the OS part.

CharlesYin, thank you very much. The tutorial is great.

I have writen it in Spanish and I have added some little questions and answers.

The link is:

http://goponygo.com/...ows-mobile-6-5/

[78212]

CharlesYin, on 12 November 2009 - 04:44 AM, said:

Hi, all

I think some of you have met the "language doesn't match" problem when flashing the firmware. The following may be a way to solve the problem:

The attachment is a tool which can split the .nb0 file from .bin or temp.dat file. The .nb0(the '0' is a number, not a letter) file is only OS part of firmware.

Flash steps:

1. Run the tool in console, give a parameter of the .bin file path. The tool will generate all the files packed in the bin file.
For example: put the x960datsplit.exe in "D:\" and acer.bin in "D:\" too.
Run the application in console: "D:\x960datsplit.exe acer.bin"
You will get the splitted files in "D:\". One of them is OS.nb0. This is the file we want to flash with.

2. Prepare a microSD card less than 2G, formatted in FAT.
3. Copy the OS.nb0 to the card.
4. Rename OS.nb0 to flash.nb0.
5. Put the microSD card in F900.
6. Make sure your phone is powered off.
7. Press OK button(the button between volume + and volume -) and power button. It will flash automaticly.
8. When you see: "SD download complete", you can reset your phone. Flash complete.
9. You may found out that the first screen picture(default is "Acer") is gone, that's normal because the picture is in the EXTROM which we haven't flashed.
10. After the first clean boot is finished and aligned screen etc, the phone will show setup EXTROM's cab interface. Because we dont have EXTROM, we have to skip this step. Press camera button when the screen shows until it says:" you can release camera button now", the step is skipped.
11. You can install cabs in EXTROM folder by yourself.

NOTE: Please select the correct bin file, or you may BRICK your phone.

Enjoy!

PS: Excuse me for my poor English.

If I pass this way England OS to Russian OS. In a consequence probably to stitch a usual official Russian OS

[sanen]

CharlesYin, on 03 December 2009 - 02:19 PM, said:

Sorry, I dont know how to do this. But you can install the cabs after you flashed the OS part.

You are right. Problem just with black screen when you start boot up device (no logo ACER, no version of rom).
Do you now how to resolve that?
Thx.

[CharlesYin]

sanen, on 04 December 2009 - 06:33 AM, said:

You are right. Problem just with black screen when you start boot up device (no logo ACER, no version of rom).
Do you now how to resolve that?
Thx.

Sorry, I dont know how to resolve that problem...

[varavut]

sanen, on 04 December 2009 - 12:33 AM, said:

You are right. Problem just with black screen when you start boot up device (no logo ACER, no version of rom).
Do you now how to resolve that?
Thx.

can you flash to offical ROM or other ROM?
if not, before flsh by nb0 you have problem "OS language does not match"?