[Rugal]

dancer_69, on Jan 31 2009, 01:29 AM, said:

I tried to port xip of your new beta wm6.5 rom to my x600 without success.
I used your guides from here: http://eten-users.eu...opic=16366&st=0
about xip porting but the device stuck at eten's logo screen.
Can you help me and give me some advices?

This not the proper way "kva guide is not for all eten devices", I encourage you to do this:
- Extract xip.bin from the build you want to port from
- Download Bepe's XIPPort (http://forum.xda-developers.com/attachment.php?attachmentid=83701&stc=1&d=1209368244)
- Extract XIPPort to any folder
The folder should contain XIPPort.exe, pkgcommon.dll, and xip.bin you want to port.
- Run XIPPort.exe
- Press "Dump xip.bin" - This will create an OUT folder
- Press "Make Pkgs"
- Open the OUT folder and you will find two folders: Files and Modules
- Copy the contents of MSXIPKernel and MSXIPKernelLTK with each folder (Files and Modules) and paste them to your /ROM/XIP folder and replace. (Note: Don't worry about copying the .txt files, they are not needed.)

greekn1c, on Jan 31 2009, 02:27 PM, said:

Hi rugal
I've tried updating to the V4 21109 M2D Version .
The upgrade seemed ok but the phone starts an freezes on the 1st screen with the blue leaf.
any ideas on what to do next???
Thanks

Try to hard reset, if not try to upgrade again using bootloader or SD method

Update:
This my first test ROM of Version 5:
I believe it's stable and fast - But I need feedback and bugs hunting...

Download link:
http://rapidshare.co...beta1_20764.rar

[dancer_69]

I already tried that with the xip.bin from your wm 6.5(I extracted it from temp.dat in your kitchen), but it doesn't work correctly.
It creates the OUT folder with FILES and MODULES subfolders and PARTHDR.txt and ROMHDR.txt, but inside these subfolders are both empty.
I repeat the procedure several times and with the xip.bin of x600 official rom witch gives empty folders also.
Am I missing something?
The extracted xip.bin is 1407kb in case it helps.

[Rugal]

dancer_69, on Jan 31 2009, 03:32 PM, said:

I already tried that with the xip.bin from your wm 6.5(I extracted it from temp.dat in your kitchen), but it doesn't work correctly.
It creates the OUT folder with FILES and MODULES subfolders and PARTHDR.txt and ROMHDR.txt, but inside these subfolders are both empty.
I repeat the procedure several times and with the xip.bin of x600 official rom witch gives empty folders also.
Am I missing something?
The extracted xip.bin is 1407kb in case it helps.

OK, then you better extract it from the source:
http://www.4shared.c.../XIP_21139.html

[dancer_69]

With this xip.bin works, but I still have problem with x600 official's rom xip. That gives always empty folders.
I extracted it with kva tools. Is there any other way to do this?

[Rugal]

dancer_69, on Jan 31 2009, 03:48 PM, said:

With this xip.bin works, but I still have problem with x600 official's rom xip. That gives always empty folders.
I extracted it with kva tools. Is there any other way to do this?

Using the official x600 rom you need to extract xip.bin using kva tools then use the ordinary Xip_DumpRom "available in my kitchen" to make romhdr.bin and XIP folder to add them in the kitchen OS\ROM

Update:
I might upgrade V5 to 20765 build from the coming HTC Iolite ROM "NEW"

[greekn1c]

Hi Rygal
the phone does not hard reset and i cannot get it into bootloader mode .
The only thing I see is the blue leaf screen!
help!!!!

FALSE ALARM1 I installed and it looks excellent!It doesn't have the satelite data update though !what do i do about it??
Thank u Rugal very good job

[dancer_69]

Rugal, on Jan 31 2009, 02:51 PM, said:

Using the official x600 rom you need to extract xip.bin using kva tools then use the ordinary Xip_DumpRom "available in my kitchen" to make romhdr.bin and XIP folder to add them in the kitchen OS\ROM

Update:
I might upgrade V5 to 20765 build from the coming HTC Iolite ROM "NEW"

Thanks for the advice.
I will try it when I'll go home.

[Rugal]

http://img50.imageshack.us/img50/6838/iolitebe7.png

I just finished porting XIP/SYS from the new coming HTC Iolite device ROM "build 20765", so V5 is updated to be on this build - Test 2 will be coming soon "still wants some feedback about test1"

@ greekn1c:
I did not get you, you managed to upgrade? or not?

[dancer_69]

I made some progress but not a success. I extracted xip with xipdumprom and took the XIP folder. I copied from wm6.5 xip the contents of FILES\MSXIPKernel and MSXIPKernelTK and the contents of MODULES\MSXIPKernel (MSXIPKernelTK was empty) to XIP folder.
After i copied this folder to OS\ROM and build the rom.
I flashed to the device, hard reset and after pass the eten logo screen, device stucks to wmobile startup screen.
Any ideas??

[Rugal]

dancer_69, on Jan 31 2009, 08:18 PM, said:

I made some progress but not a success. I extracted xip with xipdumprom and took the XIP folder. I copied from wm6.5 xip the contents of FILES\MSXIPKernel and MSXIPKernelTK and the contents of MODULES\MSXIPKernel (MSXIPKernelTK was empty) to XIP folder.
After i copied this folder to OS\ROM and build the rom.
I flashed to the device, hard reset and after pass the eten logo screen, device stucks to wmobile startup screen.
Any ideas??

This might be related to several reasons...

Check these:
1] You have WinCENLS_WWE folder in your OS\SYS from X600 official ROM
2] The boot.hv and boot.rgu in XIP folder are based on 6.1 ROM "Is the official X600 ROM you used is 6.1? if yes, ignore this.
3] Check the Redist folder in your OS\SYS, you might need to replace it from a working 6.1 ROM!

You already based the Eten Logo, so most probabley the reason is either 1 +/- 3 above, If still no success, try trial and error in replacing OS\SYS content from a working X600 6.1 ROM

[radek kosciuk]

hi!

would you advise me to upgrade my std rom in eten x500+ because of fixed bluetooth issues? I have a problem with bl and the car kit, maybe this could be helpful. hmm. any help appreciate!

btw. good job!

[greekn1c]

Rugal
all is good!Upgrade succesful!!Have not tried evrything yet but it is an excellent rom!Very good job!!!!Thank you!!

[Rugal]

radek kosciuk, on Jan 31 2009, 09:58 PM, said:

hi!

would you advise me to upgrade my std rom in eten x500+ because of fixed bluetooth issues? I have a problem with bl and the car kit, maybe this could be helpful. hmm. any help appreciate!

btw. good job!

I did not get what you mean, but if you own 500+ then don't use my ROMs as they are for X500 without the (+). Use Lorbas ROMs instead ...

greekn1c, on Jan 31 2009, 10:12 PM, said:

Rugal
all is good!Upgrade succesful!!Have not tried evrything yet but it is an excellent rom!Very good job!!!!Thank you!!

Good Work...

Enjoy..

Update:
- Iolite ROM comes with new version of Manila2D with new features ... Hmmmm

[dancer_69]

Rugal, on Jan 31 2009, 08:52 PM, said:

This might be related to several reasons...

Check these:
1] You have WinCENLS_WWE folder in your OS\SYS from X600 official ROM
2] The boot.hv and boot.rgu in XIP folder are based on 6.1 ROM "Is the official X600 ROM you used is 6.1? if yes, ignore this.
3] Check the Redist folder in your OS\SYS, you might need to replace it from a working 6.1 ROM!

You already based the Eten Logo, so most probabley the reason is either 1 +/- 3 above, If still no success, try trial and error in replacing OS\SYS content from a working X600 6.1 ROM

The official rom that I use is wm6, not 6.1, and I didn't change anything else except the xip folder. So the sys and oem folders are the original wm6. If I change the xip version, I must to change sys also?

[p_h_i_l_l_i_p]

Hi Rugal, first of all thx for the great rom's. I really like them. I have 2 questions:
1. When I receive a sms message near icon that shows messages there is a number showing 1 thats ok but when i highlight that icon and read messae ang go anywhere else home let's say I still got this number 1 near message icon. I have to click on sms text so that number is gone. But clicking on sms text opens the messages folder which is not needed since i just readed that message. Is there a possibility to change that ?
http://img132.imageshack.us/img132/6754/screen03xh2.th.png
2. Is there a possibility to get rid off that top icon which i red circled ??